|
Standard metal stud Partitions may be specified with confidence
for non-loadbearing partitions and speed of construction.
·
For both commercial and domestic partitions
·
Versatile systems to meet nearly every performance requirement
·
Minimum amount of components
These systems can utilise the entire range of boards,
including Wallboard, Moisture resistant board,
Soundblock, Fireshield, depending on the performance required.
The boards are fixed onto a lightweight metal framework of
‘C’ Studs, or ‘I’ studs.
|
example of
metal stud wall |
|
Standard ‘C’ Stud Partitions provide the simplest and most
economical system, whilst the using of ‘I’ Stud Partitions
should be used where a more rigid partition is required, without
increasing the overall thickness.
‘I’ stud partitions can be taken up to over 10m in height. Cut outs within the stud allow for services to pass through
without disturbing the integrity of the partition.
Vertical service runs are easily accommodated within the metal
framework. The finished partition can then be skim plastered finished or
taped and jointed to suit.
|
